An important reason for the shrinkage of the CSP market is that the industry has not yet formed a market-oriented development capability. In order to overcome the current difficulties, it is necessary to study and find the obstacles in the process of market-oriented development, and solve the important reasons for the shrinkage of the CSP market. The industry has not yet formed a market-oriented development capability. In order to overcome the current difficulties, it is necessary to study and find the obstacles in the process of market-oriented development and solve the problem of shrinking market size. One important reason is that the industry has not yet formed a market-oriented development capability. In order to overcome the current difficulties, it is necessary to study and find out the obstacles in the process of market-oriented development and solve them. An important reason for the shrinkage of the CSP market is that the industry has not yet formed a market-oriented development capability. In order to break through the current predicament, it is necessary to study and discover the market. The obstacles in the process of globalization should be solved.

The PV modules of the PV panel cleaning robot shall be cleaned in the morning, evening, night or rainy days. Cleaning operations in the morning and evening must be carried out in dim sunlight.

Routine steps of photovoltaic panel cleaning robot

Step 1: Dust removal
The PV panel cleaning robot uses a dry dust remover or rag to wipe the accessories on the module surface, such as dry ash and leaves. If the module surface has no other accessories and has been cleaned by this procedure, you can skip the following step.

Step 2: Scrape
If soil, bird droppings, plant branches and leaves are closely attached to hard objects, non-woven cloth or brush shall be used for wiping. Do not scrape with high hardness objects, and do not scrape easily without adhering to the area with hard objects to remove foreign matters.

Step 3: Cleaning
If there is dye on the surface of the component (such as bird droppings, plant juice, etc.), or the air humidity in the site is too high to wipe dust, it needs to be cleaned. It is generally removed with clean water. After spraying clean water on the contaminated area, wipe it with a brush to remove it.
If it is oily substance, please use a mixture of detergent or soapy water to smear it on the dyed area. After the solution seeps into the pollutant, wipe it off with a brush. If it still cannot be removed, please use a small amount of alcohol and other non alkaline organic solution to wipe, and then use a mixed solution containing detergent to wash off the remaining organic solution.

Brush specification requirements
1. Material of special wire for brush: nylon 1010;
2. The diameter requirement of the special line for cleaning coated glass brush: 0.1~0.06mm.
PV panel cleaning robot